COMPANY HEADER
Print Back
3i Series Cases are injection molded from ultra-high strength polypropylene copolymer resin, specified by the U.S. military for cases and containers. Features a gasketed, water and dust-tight submersible design, meeting military standard MIL-C-4150J. The automatic ambient pressure equalization valve self-regulates for different altitudes meeting military standards MIL-STD-648C and IP67. It is resistant to UV, solvents, corrosion, fungus and impact damage, surpassing military standard MIL-STD-810F. Features a continuous molded-in hinge with stainless steel pin, a patented trigger release latch system, and a comfortable, snap-down, rubber over-molded handle. All 3i Series Cases are backed by an Unconditional Lifetime Warranty. Key locking "TSA" accepted versions also available.
Injection Molded Cases (3i Series)
Unit of Measure
Items 8.63 Inch (in) External Length and 1.56 Inch (in) External Height Injection Molded Plastic Equipment Case (3i-0702-1)
3i-0702-1
8.63 Inch (in) External Length and 1.56 Inch (in) External Height Injection Molded Plastic Equipment Case 		Injection Molded Cases (3i Series)
3i-0705-3
8.36 Inch (in) External Length and 3.83 Inch (in) External Height Injection Molded Plastic Equipment Case 		Injection Molded Cases (3i Series)
3i-0806-3
9.41 Inch (in) External Length and 4.35 Inch (in) External Height Injection Molded Plastic Equipment Case 		10.73 Inch (in) External Length and 4.80 Inch (in) External Height Injection Molded Plastic Equipment Case (3i-0907-4)
3i-0907-4
10.73 Inch (in) External Length and 4.80 Inch (in) External Height Injection Molded Plastic Equipment Case 		10.68 Inch (in) External Length and 6.82 Inch (in) External Height Injection Molded Plastic Equipment Case (3i-0907-6)
3i-0907-6
10.68 Inch (in) External Length and 6.82 Inch (in) External Height Injection Molded Plastic Equipment Case
External Length N/A 8.63 in N/A 8.36 in N/A 9.41 in N/A 10.73 in N/A 10.68 in
External Width N/A 3.14 in N/A 6.70 in N/A 7.82 in N/A 9.69 in N/A 9.69 in
External Height N/A 1.56 in N/A 3.83 in N/A 4.35 in N/A 4.80 in N/A 6.82 in
Internal Length N/A 7.76 in N/A 7.50 in N/A 8.50 in N/A 9.50 in N/A 9.38 in
Internal Width N/A 2.15 in N/A 5.00 in N/A 6.00 in N/A 7.38 in N/A 7.38 in
Internal Height N/A 1.30 in N/A 3.25 in N/A 3.75 in N/A 4.13 in N/A 6.13 in
Lid Depth N/A 0.65 in N/A 0.50 in N/A 0.50 in N/A 1.19 in N/A 1.19 in
Base Depth N/A 0.65 in N/A 2.75 in N/A 3.25 in N/A 2.94 in N/A 4.94 in
Weight N/A 0.3 lb N/A 1.2 lb N/A 1.7 lb N/A 2.4 lb N/A 2.8 lb
Color Options N/A Desert Tan Gray OD Green Safety Orange Safety Yellow
Cubed Foam1 N/A N/A Yes N/A Yes N/A Yes N/A Yes
Layered Foam2 N/A N/A N/A N/A Yes N/A Yes
Padded Dividers3 N/A N/A N/A N/A Yes N/A Yes
Accreditations and Standards N/A IP67
MIL-STD 648C
MIL-STD 810G
Accessories N/A
  • Foam
  • Dividers
  • Lid Organizers
  • TSA Combination/Padlock Kits
  • Optional TSA Key Locking Latch Conversion Kits
  • Panel Mount Kits
  • Shipping Label Plate Kits
About CP Cases N/A CP Cases designs and manufactures high-performance, protective cases and racks used for transport, operation and storage of essential equipment in commercial and military applications.

Many of our products are accredited to MIL-STD-810F, rated IP65 and carry NATO stock numbers. With over 40 years' of expertise in producing cases, 19-inch rack solutions and rugged textile products, CP Cases has an unparalleled range of in-house skills and knowledge with materials and processes, including rotationally moulded products, plastic fabrication, aluminum, laminated plywood, HPP, textiles and CNC foam machining.

Full Capability Statement available on request.
Features N/A With Handle, Lanyard & Clip N/A N/A N/A N/A
Note N/A Custom Foam, Hot Stamping, Colors and other options available in minimum quantities.
  • 1 Customer pulls out sections to create a foam pocket that corresponds to the shape of their equipment.
  • 2 Different horizontal layers of egg crate style foam.
  • 3 Customers with different items to store in their cases.